Page 5 - FullLine Siding Brochure
P. 5
Features of Cedar Impressions Individual Shingles Siding
There are seven different shingle sizes with widths varying from 4" to
8". Shingles are engraved within the staple zone. Shingles are 12" long Triple 5"
and require 5" exposure. Installation is made simpler with these easily Sawmill Shingles
identiable features marked on the front each shingle.
Shingle Gap Zone
Overlapping shingle
gap must fall between
upper vertical marks and
Fastener Target Zones
(1-1/2" minimum from
shingle edge)
Starter 1/2" Offset
Align with top of rst
course shingles.
Course Hash Marks
Align marks to top of
prior course to assure
5" exposure.
Pre-formed Holes
For hand nailing
application
Hearthstone
1/2" PANEL DIMENSIONS
Panel
Projection
Note: with two shingles
lapped panel projection 5"
Profile
is 1" and requires a 1"
pocket accessory. 5"
Profile
5"
Profile
Fastener Target Zone
Fastener must be applied 3/4"
Panel Projection
within the recessed area.
2 fasteners per shingle
are required. Available Lengths: 60"
Individual 5"
Outside Corner
Posts
Sawmill Triple 5"
Outside
Corner Posts